CIR.FUT3D.FRO.CLR
CIR.LERGE.FRO.BLK.O1 with cable

Filament Run Out Detector 1.75mm (Clear)

$4.95 excl GST

38 in stock

SKU: CIR.FUT3D.FRO.175.CLR.20220203 Category:

Product Description

Want create site? Find Free WordPress Themes and plugins.

Filament run out detector for 1.75mm filament (case is manfuactured out of clear injection molded plastic)

  • fully assembled
  • internal microswitch senses end of filament
  • onboard LED shows when filament is present
  • cable included
  • arrow stamped on the module to show direction of filament for correct operation

Operation:

  • Supply 3.3-5v to Pin 1
  • Gnd to pin 2
  • The module outputs to Pin 3
  • When filament is present (internal microswitch is depressed):
    • Onboard LED is on
    • Signal Pin 3 outputs the supply voltage (3.3-5v)
  • When filament runs out i.e. is not present (internal microswitch is not depressed):
    • Onboard LED is off
    • Signal Pin 3 is tied to Gnd so 0V

(Cabling diagram below is of the BLACK version)

Physical

  • Connection is a 3 pin JST XH type male socket
  • 3 way cable included:
    • approximately 1m long
    • terminated with JST XH type female 3 way plugs at both ends
  • See diagram below for dimensions
    • Mounting holes accept M3 screws

 

Dimensions (approximate as I find some slight variation, but pretty close and the mounting holes are 20mm apart)

 

Did you find apk for android? You can find new Free Android Games and apps.