2080 T-Slot

Custom Machined Extrusions for FARH V0.1

$102.00 excl GST

Out of stock

SKU: Custom.FARH.20181220 Category:

Product Description

Want create site? Find Free WordPress Themes and plugins.
  • 2 x 2020 T-Slot extrusion 200mm long
    • Machine each:
      • 2 x Mill/Drill land/hole for M6 cap screw
        • 70mm in from each end on same face (ops x8)
  • 2 x 2020 T-Slot extrusion 380mm long
    • M6 Tap both ends to min depth 20m (ops x4)
  • 1 x 2020 T-Slot extrusion 350mm long
    • M6 Tap both ends (ops x2)
  • 1 x 2080 T-Slot extrusion 250mm long (Right)
    • Viewing outside (as assembled) 80mm wide face (oriented vertically):
      • On outside face, from top end:
        • 4 x M4 M3 Tap, on the centerline, right through, at: (ops x8)
          • 33mm from top
          • +25mm from above
          • + 25mm from above
          • + 25mm from above
        • 2 x Mill/Drill land/hole for M6 cap screw (ops x4)
          • On 2 outside T-Slots, 10mm in from end
        • 1 x Mill/Drill/Mill land/hole/land (‘like’ for M6 cap screw) (ops x3)
          • On centerline of rightmost T-Slot
          • Land on both sides
          • 93mm from end
      • On outside face, from bottom end:
        • 1 x M6 Tap, on the centerline, right through, at (ops x 2)
          • 40mm from bottom
  • 1 x 2080 T-Slot extrusion 250mm long (Left)
    • Viewing outside (as assembled) 80mm wide face (oriented vertically):
      • On outside face, from top end:
        • 4 x M4 M3 Tap, on the centerline, right through, at: (ops x8)
          • 33mm from end
          • +25mm from above
          • + 25mm from above
          • + 25mm from above
        • 2 x Mill/Drill land/hole for M6 cap screw (ops x4)
          • On 2 outside T-Slots, 10mm in from end
      • On outside face, from bottom end:
        • 1 x 10mm BULLNOSE Land only (to 6mm depth):  (ops x1)
          • 20mm from left side, 20mm from end
        • 1 x 12mm BULLNOSE Land only (to 6mm depth): (ops x1)
          • 20mm from right side, 20mm from end
        • 1 x 12mm BULLNOSE Land only (to 6mm depth): (ops x1)
          • 20mm from right side, 40mm from end

Extrusion $42.00

Machining $80.00

This price is for an exploratory initial single run only, (extrusion cost is not expected to change excepting mistakes in this listing/revisions), future machining cost dependant on revisions/volume per order

Did you find apk for android? You can find new Free Android Games and apps.