AM8.FULL.KIT.364.V20

ANet A8 to AM8 Frame Conversion Kit (364mm)

$99.00 excl GST

2 in stock

SKU: AM8.FULL.KIT.364.V20 Category:

Product Description

Want create site? Find Free WordPress Themes and plugins.

This is our version of an ‘AM8’ frame conversion kit for the ANet A8 per www.thingiverse.com/thing:2263216

For additional product pictures please refer to the assembly manualMecha AM8 V2.00 Assembly 20180523

No 3D printed parts are included in this kit.  To convert your A8 with this kit you will first need to print the required parts per www.thingiverse.com/thing:2263216 

Note however the Y Rod holders per www.thingiverse.com/thing:2462104 are the better choice as in this kit we supply 364mm Base Side members rather than the original 340mm Base Side members per the remix at www.thingiverse.com/thing:2462104. This is so you do not need to change the firmware and retain the full print area of the original A8 frame

This kit provides an uncluttered, strong and rigid frame that requires minimal brackets/braces.  It only needs the supplied 2 x steel & 2 x aluminum corner brackets

Note this means you should not need these 3D printed parts:

  • 2_Top_Corner_Plate.stl
  • 2_Bottom_Tee_Plate.stl
  • 4_Bottom_Corner_Plate.stl

4 rubber feet are also supplied in this kit


Currently these kits are made to order.  Please allow up to 2 days additional kitting/manufacturing time, from when your payment is received until it ships.  Of course we as always endeavor to ship orders asap so *probably* we will get them out quicker.


You will receive the Kit contents as listed in 3 parts below

Kit contents Part 1 -> 2040 Extrusion:

  • 1 x 313mm Top Cross member (2040 extrusion)
    • threaded 4 x end bores M6 for fixing to Vertical members
  • 2 x 313mm Base Front/Back members (2040 extrusion)
    • each milled x 4 to accept recessed M6 Cap Head bolt for fixing to Base Side members
  • 2 x 364mm Base Side members (2040 extrusion)
    • each with threaded 4 x end bores M6 for fixing to Base Front/Back members
  • 2 x 440mm Verticals members (2040 extrusion)
    • each drilled with 2 x hex key access holes at top for attaching to top cross member

Kit contents Part 2 -> Miscellaneous hardware for assembling the frame:

  • For joining Top Cross member to Vertical members
    • 4 x M6x20mm stainless steel button head screws
  • For joining Base Side members to Vertical members
    • 2 x stainless steel 20mm right angle brackets +
      • 4 x M4x8mm stainless steel countersunk screws
      • 4 x M4 T-Block nuts for 6mm T-Slot
    • 2 x aluminium 20x20x40mm right angle brackets +
      • 8 x M5x8mm stainless steel button head screws
      • 8 x M5 T-Block nuts for 6mm T-Slot
  • For joining Base Side members to Base Front/Back members
    • 8 x M6x30mm stainless steel cap head screws
  • For Base Side member feet
    • 4 x circular rubber feet
    • 4 x M4x8 stainless steel button head screws
    • 4 x M4 drop in/swivel nuts for 6mm T-Slot

Kit contents Part 3 -> Miscellaneous hardware for assembling the 3D printed parts (printed by you) to the frame:

  • 39 x M5x10mm stainless steel button head screws
  • 9 x M5x10mm stainless steel cap head screws
  • 23 x M5 T-Block nuts for 6mm T-Slot
  • 24 x M5 drop in/swivel nuts for 6mm T-Slot

Note1: Where we consider a part to be stressed we supply T-Block nuts, otherwise we supply drop in/swivel nuts

Note2: There may be mistakes in the parts list below or ommissions. Hence we supply a couple of spares and if you are an early customer please let us know if we have missed anything.

The following graphic shows where the above hardware is used during assembly of the printed parts to the frame

Did you find apk for android? You can find new Free Android Games and apps.